Depressurize, means relieve the fuel pressure on your vehicle’s fuel system. Today’s vehicles use a fuel system to supply an appropriate mixture (fuel and air) to the engine cylinders for burning.
You need to depressurize fuel system before any maintenance work have done as it (fuel system) works at high pressure.
It is also necessary to depressurize the fuel system efficiently to avoid unwanted happenings, especially explosion of fuel system. This will keep your fuel system safe, although there is a fire.
Depressurize the fuel system is important in final conditions as well for ultimate safety, and you can do it in many ways. This will tell you the best ways to depressurize a fuel system perfectly.
Best possible ways to depressurize a fuel system:
1. Open the drain valve: This method knows as one of the quickest ways to depressurize a fuel system.
In this method, you have to open the drain valve at the fuel tank bottom and have to permit the fuel for flowing until it becomes just a drip.
Although, there is no chance of serious injure, but fuel run out on your journey will arise more terrifying situation.
2. Let the gas out by turning off the engine: This is the method where you need to out the gas by turning off your vehicle’s engine.
You can also do it by attaching an air hose into the vehicle’s fuel system, where the air is blown via a nozzle to out the gas. The third way to get out the gas from the tank is to use a safety device.
3. Using an engine vacuum: An engine vacuum can depressurize a fuel system. It will open a fuel pump using a safety pin to add the fuse wire end with the ground.
This will halt your fuel pump from running and if you need fuel then you need to pump it by using your hand.
4. Lift the vehicle back side and secure it using a jack: Depressurize a fuel system is hard-working, and it is the only way to decrease the pressure to zero.
But you make this job easier by lift your vehicle back side and secure it by using a jack. You need to make sure that your car seat does not fall. It is another possible way to depressurize a fuel system of your vehicle.
5. Wait until to cool down the engine: In this method, you have to wait until to cool down the engine. Afterward, start your vehicle engine until the fuel tank is fully empty.
During this time, open the valve of the fuel pump and after some time close it as well. This process will depressurize the fuel lines. The other way is using a wire and wait for the engine until it cool down.
6. Closing the emergency valve: Depressurize a fuel system is necessary while the tank is in an urgent situation.
For depressurizing, you need to close the emergency valve and emergency shut-off valve. Now wait for some times for fuel tank to depressurize.
How to depressurize a hydraulic system?
It must to depressurized your vehicle hydraulic system while repair its power unit. Depressurizing make tool hose connection simpler. For depressurizing, follow the steps below.
1. At first, shut-down the power unit engine.
2. Change ON/OFF lever flow to ON position for depressurizing.
3. Finally, before start, the power unit engine again change ON/OFF lever flow to OFF position from the ON.
Something you should know:
- You must stop your vehicle engine prior to filling the fuel tank.
- Avoid to fill vehicle fuel tank when the engine is hot.
- It is highly recommended not to fill fuel tank while smoking or in open flame because it is explosive that may arise a serious injury and even death.
Does it safe to drive the vehicle if fuel filter has problem?
The answer is ‘Yes’ until your vehicle filter is not leaking. If there is a clogging, that may cause engine operate issues, you need to fix and resolve it immediately.
Does it safe to drive the vehicle if fuel filter has problem ?
Additionally, if you figure out any leak in vehicle filter, then you must repair it before car driving.
In utmost situation, the old filter of your vehicle can disconnect and permit trapped contaminants to enter fuel injectors.
So, it is important to check your filter before start the driving to avoid unwanted problems.
In Conclusion:
Not only fuel adding is necessary to the tank, but also releasing air from the vehicle system is crucial.
The both of them are important because engine is the main part of any vehicle, and it required to run properly.
Furthermore, fuel system depressurization is vital to relieve your fuel system from fuel additional pressure. Follow the steps in this article described and depressurize your fuel system safely
